BMRE Oldsmobile “Exclusive Correct Fit and Geometry Travel Over the Valve” 1.6 Ratio Roller Rocker Arms for Edelbrock small block and big block aluminum cylinder heads for 7/16” rocker studs with poly locks, 1.6 ratio (modified specifically for BMRE) It’s all about the center lines from “the center line of the trunnion to the center line of the roller tip” that makes ours “Correct Fit”. Set of 16. Made in USA.
Note; Our “Correct Fit” Edelbrock 1.6 Ratio Rocker Arms are clearanced for up to 0.750” valve lift using 3/8” diameter pushrods… The incorrect fit small block Ford rocker arms that others sell are designed for 5/16” pushrod diameter, the pushrod relief in those don’t clear 3/8” pushrods like ours are designed.
BMRE Oldsmobile “Exclusive Correct Fit and Geometry Travel Over the Valve” 1.6 Ratio Roller Rocker Arms for Edelbrock small block and big block aluminum cylinder heads for 7/16” rocker studs with poly locks, 1.6 ratio (modified specifically for BMRE) It’s all about the center lines from “the center line of the trunnion to the center line of the roller tip” that makes ours “Correct Fit”. Set of 16. Made in USA.
Note; Our “Correct Fit” Edelbrock 1.6 Ratio Rocker Arms are clearanced for up to 0.750” valve lift using 3/8” diameter pushrods… The incorrect fit small block Ford rocker arms that others sell are designed for 5/16” pushrod diameter, the pushrod relief in those don’t clear 3/8” pushrods like ours are designed.
Image 1 of 5
Image 2 of 5
Image 3 of 5
Image 4 of 5
Image 5 of 5